 |
Torque master |
The MX2 delivers 200% starting
torque near stand-still (0.5 Hz) and
can operate in torque control in
open loop mode. This allows the
MX2 to be used in applications
where closed loop AC vector drives
were previously used. |
 |
Easy network integration |
Built-in RS485 Modbus
communications and the possibility
for integration in standard industrial
networks, such as Dnet, Profibus,
CANopen, CompoNet, ML-II or
EtherCat makes the MX2
exceptionally easy to integrate. |
 |
External 24 VDC for
continuous operation |
With no additional hardware, a 24
VDC connection to the MX2
ensures the CPU is always in
control, even if the main input is
removed. This feature is vital in
providing a controlled stop in
emergency situations and in
keeping the network
communications operating. |
 |
Safety embedded;
ISO 13849-1, cat 3 |
Dual contactors at the output of the
inverter are no longer required.
Direct connection to a safety
controller ensures compliance to
ISO 13849-1, cat 3. |
 |
EDM monitoring output |
An External Device Monitoring
(EDM) output confirms the safety
status of the inverter, saving you
the cost and wiring of external
devices to carry out the same
function. |
 |
Direct integration into the
safety circuit |
MX2 inverters can fit easily into the
safety circuit. The safety inputs can
be linked from one inverter to
another without additional safety
relays. |
 |
Speed synchronisation |
With no external hardware required, and via standard
parameter settings, speed synchronisation can be
achieved. The MX2 will act as a speed follower to an
external pulse generator/encoder signal up to 32 KHz. |
 |
Positioning functionality |
Specially developed application functionality enables
the MX2 to solve simple positioning tasks without the
need for an external controller. Up to 8 positions, plus
home, can be selected by the user, and furthermore,
the MX2 can be switched between speed and position
mode. |
 |
Free to program |
• Intuitive and user friendly flow chart programming
• Integrated in CX-Drive
• Up to 1000 lines in a program
• 5 tasks can run in parallel |
| |
|
